How does the WPS button work? (2024)

FAQs

How does the WPS button work? ›

The WPS button simplifies the connection process

WPS stands for WiFi Protected Setup. A router with a WPS button can allow any device to automatically connect to your router when the WPS button is pressed. When you press the WPS button, your router looks for compatible devices right away and allows those devices automatically connect.

Depending on the device model and Android version, the settings may vary. But the order of operations will be roughly the same. Enter the Wi-Fi settings, select 'Advanced Features', and push the 'WPS Button'. Then, the process of connecting via WPS will begin.

Press the WPS button on the device you wish to connect. Within 120 seconds, press the WPS button on the wireless router. Note: You will need to press and hold the WPS button on the wireless router for about 2-3 seconds. After a short period of time, your device and the wireless router will be connected.

To use WPS function, please push the button for less than 5 seconds, and then the WPS LED will flash; to reset the router, please push the button for at least 10 seconds. With the Router powered on, press and hold the WPS/RESET button (more than 10 seconds) until the SYS LED becomes quick-flash from slow-flash.

Push the WPS button on the router.

In the device's WiFi settings, locate and select the name of the wireless network (SSID) you're trying to connect to. It should complete the connection without entering a password.

To connect to a WPS-enabled router, press the WPS button on your router or access point. Press and hold down the Wi-Fi button on your product for 3 seconds. Note: Be sure to press and hold the Wi-Fi button on your product within 2 minutes of pressing the WPS button on your router or access point.

The WPS button simplifies the connection process

Press the WPS button on your router to turn on the discovery of new devices. Then, go to your device and select the network you want to connect to. The device is automatically connected to the wireless network without having to enter the network password.

WPS button blinking RED: There was an error when connecting, or a session overlap was detected. If this continues for more than 30 seconds, try rebooting your modem.

WPS light. This light helps you identify the pairing process with other devices on your Wi-Fi network. If the light is: Green (blinking slow): The gateway is ready to pair with a device with WPS.

Can WPS be turned off and on? ›

Log in to the router settings (the default username is admin, and the default password is 1234). Select Wireless Setup. Select WPS. Select the blue button to disable WPS.

WPS Function Weaknesses. WPS can be a vector for malicious attackers to get onto your network without the need for your Wi-Fi password. WPS uses an 8-digit PIN which can be brute-forced, leaving your network vulnerable regardless of the strength of your password.

Is the reset button the same as the WPS button? On some devices, the reset and WPS buttons are the same. If you don't see a separate reset button, you can reset your device by holding down the WPS button for 10 seconds.

Wi-Fi® Protected Setup (WPS) is a built-in feature of many routers that make it easier to connect Wi-Fi enabled devices to a secure wireless network.

But this is where your router's WPS button can help. When you press the WPS button on your router, it'll allow any nearby devices to connect to it with no password required. This typically lasts a few minutes before your router deactivates WPS automatically.

You'll find that the settings have been reset to their original defaults. My Experience: Resetting settings of WPS Office provided a clean slate for troubleshooting persistent issues. However, keep in mind that any personalized settings and configurations will be lost.

For example, on their popular TP-Link Archer AX20, the WPS button is also on the back of the router, but it has two functions: a short 1-second press on the button activates WPS, while a long press (two seconds or more) turns on and off the Wi-Fi.

WPS is a wireless method that is used to connect certain Wi-Fi devices such as printers and security cameras to the Wi-Fi network without using any password. In addition, there is another way to connect called WPS Pin that is used by some devices to connect to the wireless network.