Sire Larry Carlton H7 Review & Prices (2024)

Your feedback

Not all instruments are created equally, and there are many important things they won't tell you about the one you're buying. That's why it's important to have different opinions. Here's what our users who have played this guitar say. If you've played it before, help others by voting below!

Explore All Sire Guitars >

Is The Sire Larry Carlton H7 Easy to Play?

The Sire Larry Carlton H7 meets 6 out of our 8 criteria items for beginner friendliness, which means that it's a good guitar to start with as a complete beginner. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players to get used to.

Hand Size Comfortability

After taking into account the neck profile, scale size, fretboard radius, and nut width, we can conclude that the Sire Larry Carlton H7's construction favors people with relatively small hands.

Nevertheless, this comes down in the end to personal preference. Make sure you test this guitar—or another one with similar characteristics—before buying.

Scale Length

Scale length is the distance the strings will span between the bridge and the nut. It can tell you a lot about the overall playability and tone of the instrument. A longer scale length means longer distance between frets, brighter tone and more string tension—which means lower action, but more difficult bending of the strings.

Here's the Sire Larry Carlton H7's 24.75" scale length compared to other common sizes:

This is the scale length used in most Gibson guitars. If you like the playability of a Gibson, this guitar will feel pretty similar. It's a lot shorter than the typical Stratocaster (25.5'')

As you can see from the picture above, a shorter scale length also means shorter separation between frets. If you got really small hands, you probably will feel more comfortable playing this guitar than a Fender Stratocaster.

This scale length also allows for easier bends and vibratos because the strings will have lower tension due to the shorter scale.

Finally, another thing affected by scale length is tone. A shorter scale will give less room for the harmonics, thus resulting in a warmer, more 'bassy' tone.

Still, remember that you string gauge plays an important part in all of this. A lighter gauge will make it easier to perform bends, vibratos and will also give you a brighter tone.

Neck Profile

The neck profile tells you the thickness (neck depth) and shape in cross section. Every difference will completely change the feeling and comfortability of the neck. This is a highly subjective thing, but most players indeed prefer certain types of necks (like Cs and Ds) because they feel nice in most hands.

The Sire Larry Carlton H7's neck thickness is approximately 0.9'' (22.9mm) at the first fret, and 0.94'' (23.9mm) at the twelfth.

These measurements were taken either from the official Sire website, or, in case this information wasn't provided, by researching multiple online marketplaces and forums where owners of this model have posted their measurements.

Fretboard Radius

When it comes to fingerboard radius, personal preference will dictate which one is better for you. However, most people seem to agree that a more curved (lower) radius will make it easier to play chords while a less curved (higher) radius is better for soloing and bending.

The Sire Larry Carlton H7 has a 12" fingerboard radius. Here's an image comparing this guitar's fretboard radius to other popular choices:

This is the same radius that Gibson uses in most of their guitars. When compare to the other popular radius of Fender Stratocasters, you can see that it's a lot flatter. Guitars with this radius are usually made to bring a good balance between single-note and chord playing.

Compound radius fingerboards give the best of both worlds. Unfortunately, the Sire Larry Carlton H7 has the same radius across the board.

Nut Width

The Sire Larry Carlton H7 has a nut width of 40mm (1.575'').This is narrower than the typical 43mm (1 11/16") width. This means that this guitar will have a narrower string separation at the nut, which will affect your fretting hand.

If you are a player with big hands, you might find it difficult to play chords without muting strings. However, this is good for players who have smaller hands, as it will allow them to reach each string much easier at the nut.

Frets

The Sire Larry Carlton H7 has 22 frets.Even though 24 frets has become really popular, there's still a good reason to get fewer frets; the pickup at the neck position will be further away from the bridge. This makes the neck pickup achieve a warmer tone. You might want this if you're playing Jazz or similar genres.

However, if you don't care about the warmer neck pickup, more frets will always be better. It's always nice to have the option to play higher notes if you want to.

It comes with nickel silver frets, so they won't last as long as stainless steel frets. If you use your instrument a lot, you might need to replace the frets after a few years. But this is unlikely as most people change instruments before this happens.

Fret Size

Finally, let's talk about fret size. Some people prefer tall frets because it's easier to press the strings and perform bends since there's less friction against the fretboard. On the other hand, some people like shorter frets because they like to touch the fretboard when playing, or because they got heavy hands and tend to press too much on the string and alter the of the note pitch accidently.

The Sire Larry Carlton H7's frets are Medium Jumbo size. These sit somewhere between a Jumbo and a Medium fret. They're not quite as tall as a full Jumbo, so you'll still feel the fretboard, but you won't feel it as much as with medium frets. This is a good size if you want to make it easy to press the strings but would also like a little bit of ''feedback'' to know when to stop pressing so the notes don't go out of pitch.

Playability Score

Does the Sire Larry Carlton H7 Sound Good? Tone Analysis

Wood will have little influence in the final tone of an electric guitar. Instead, the hardware, especially the pickups, will be the most important thing to look at. Bur first, let's see the quality of the wood.

Pickups

Unfortunately, it doesn't come with pickups from one of the top brands. This doesn't mean you will get bad pickups, but you might want to consider a pickup upgrade after some time.

These are passive pickups, so you can expect a moderade level of hot output instead of the overwhelming output that distinguises active pickups in metal.

The Sire Larry Carlton H7's configuration is HH. With this pickup combination, you'll get warmer tones and more output than using single coils. Humbucker pickups cancel the noise that single-coil suffer from, which also results in a warmer tone. This pickup combination isn't only for high-gain music like Hard Rock or Heavy Metal. Their warmness is also popular for Jazz, Indie, R&B, Blues and more.

Versatility

It comes with the popular 3-way switch that is present in most guitars. For more versatility, guitarists tend to prefer a 5-way switch, although it all depends on what you want to use your guitar for.

Unfortunately, it doesn't come with more options for coil split or coil tapping. This makes it less versatile than some competitors.

Diagram

What music genre is the Sire Larry Carlton H7 good for?

As a 6 strings, Semi-Hollow guitar with HH configuration and Passive pickups, we'd recommend it for genres like Jazz or similar. However, you can use almost any guitar for any genre. This is just the typical type of music for this kind of guitar.

Sound Score

How well is the Sire Larry Carlton H7 Built?

Where is the Sire Larry Carlton H7 Made?

Knowing where the guitar is produced is a good way to know how well it's built. Some manufacturing countries are known for having higher quality standards. For example, most expensive guitars are made in the US or Japan, but there are some exceptionally great countries—like South Korea—that are building a good reputation.

The Sire Larry Carlton H7 is made in Indonesia. Many people prefer the quality of an Indonesian guitar over a Chinese. Respectable brands like Epiphone, Ibanez and Schecter are building in this country because of the great quality and lower price. Some people like to compare them to the ones built in Japan during the 80s, when Japanese guitar makers made a name for themselves.

Bridge

Sire StandardTune-O-matic & Stop Tail Piece: The advantage of fixed bridges is that they don't require any kind of set-up. This makes it extremely easy when changing strings because you don't need to adjust anything besides tuning the guitar. Also, the fact that the bridge is directly attached to the body will help to increase sustain. The disadvantage is the lack of versatility since you can't create the same vibrato effects as with tremolo bridges.

Nut Material

Another important thing to analyze is the nut material, as it's one of the most important aspects that can affect the sound and playability of your guitar. A well-cut nut will make sure the guitar stays in tune and will make it more comfortable to play.

In this case, the Sire Larry Carlton H7 has a Bone nut.This material is one of the highest quality you can get. It provides excellent sustain and tune stability if cut well. The only disadvantage is that it's an organic material, so it's not consistent. Two different bone nuts, even if made from the same bone, will probably sound slightly different. However, bear in mind that this is only relevant when playing open strings.

Neck Joint

The neck joint is the part where the neck of the guitar meets the body. There are three main techniques to attach both parts together: Set-In, Bolt-On and Neck-Through. The latter two provide different advantages, although neck-throughs are the most expensive.

This guitar has a Set neck joint. This type of neck joint consists of using different pieces of wood for the neck and the body of the guitar. Both pieces are then glued together. This is more expensive to make than a bolt-on neck, but it's cheaper than a neck-through guitar. Some people believe that this gives more sustain than a bolt-on neck due to both pieces having a 'better connection' than with bolts. Still, it's something difficult to prove.

However, this type of neck joint does have the disadvantage of not allowing you to easily swap the neck for another. This makes this type of neck joint less mod-friendly.

Build Quality Score

More Comparisons

Gibson SG Junior

Compare

Dean ML Select 24 Kahler Quilt Top

Compare

Epiphone SG Standard 60s

Compare

Fender Squier Classic Vibe 60s Jazzmaster

Compare

Fender Deluxe Strat HSS

Compare

Chapman ML1 Hybrid

Compare

ESP LTD EX-201

Compare

Jackson Pro Series Soloist SL2P MAH

Compare