Where Can I Find the WPS Pin (2024)

FAQs

Where do I find my WPS PIN code? ›

The WPS pin can almost always be found in the settings menu of your printer's control panel. It will vary brand by brand, but you simply need to enter the settings menu, and look for wifi or network options and the WPS pin should be in one of the nested menus.

Select [WPS PIN]. A list of available SSIDs (access points) appears. Select the network name (SSID) you want. The PIN code (8 digits) of the receiver appears on the TV screen.

Routers with WPS turned on have a PIN code that's automatically generated. You can find the WPS PIN on the WPS configuration page. Some devices without a WPS button will ask for that PIN. They authenticate themselves and connect to the wireless network if you enter it.

Is the WPS PIN the Wi-Fi password? No, these two codes are not the same. Even once you've entered the WPS PIN, you'll still need to enter the wireless network password to connect to your preferred network.

Restart the printer and the computer or mobile device to clear possible error conditions. Restore Wi-Fi setup mode. Most printers with a touchscreen display or menu: Open the Wireless or Setup menu, select Network setup or Settings, and then select Restore Network Settings.

Type in 8-digit PIN code, you can find it on the label at the bottom of the device. Click Next, the router will set a WPA2-Personal password for your wireless network automatically. You need remember the password.

The WPS does not handle the connection of Wifi but it handles the data sending between the client device(s) and the router. The WPS is a password-protected wireless network that supports the WPA (Wifi Protected Access Personal) or WPA2 (Wifi Protected Access2 Personal) security protocols.

Wi-Fi Protected Setup (WPS) is a feature supplied with many routers. It is designed to make the process of connecting to a secure wireless network from a computer or other device easier.

The WPS PIN is actually on your router, possibly on a sticker attached to the back or the underside. You can also see it by signing in to your router's administrative utility.

What is the WPS button on my printer? ›

Some access points (often called routers or hubs) feature an automatic connection button labelled “WPS” which stands for Wi-Fi Protected Setup and allows permitted devices to connect to your network without needing to enter a password.

A network security key is often labeled on the exterior of a router. You should look for a small sticker at the back or the bottom of the device. If it's not available there, check its packaging box or the manual that came with it from the manufacturer.

Reboot the router as well as your computer and printer if this occurs. Ensure that the printer is showing up on your network after restarting all of your equipment. If it is still not working, check that the printer is connected properly to the router and that the printer itself does not indicate any errors.

The WPS button simply allows wireless devices to connect easily to your home WiFi network and usually can be found on the back of the router but may appear on the front of the device.

Restart All Your Devices

A restart helps fix any software glitches that could cause your wireless printer and connected devices not to work properly together. The wireless printer, router, computer/other device, wireless access point and modem all rely on your home or office network in order to connect to the internet.

A WPS pin, or Wi-Fi Protected Setup Pin, is an 8 digit combination of numbers and/or letters used by your wireless router (Wi-Fi) to encrypt and protect your home network. It's like a password that can be found in the back or bottom of all routers.

Locate the Reset button on one of the sides of the router, usually on the back where the connectors are. If it's in a pinhole then you'll have to use a pin that fits in there. Press and hold the Reset button between 7-15 seconds then release it. The lights on the router should briefly turn off then back on.

Get the default username and password of your router. You can also find it on the Router Manual or Handbook. Check also at the bottom or back sticker of your router. The most common default username is admin, and its most common password is either admin or password.

Did the WPS process time out? The WPS light will continue to flash and the router search for devices for up to 2 minutes. If it doesn't connect successfully in that time, it will usually reset and you will need to press it again to try a new connection.

The WPS button simplifies the connection process

Press the WPS button on your router to turn on the discovery of new devices. Then, go to your device and select the network you want to connect to. The device is automatically connected to the wireless network without having to enter the network password.

How do I connect my printer to Wi-Fi without WPS? ›

Connecting using a network key or PIN

If your printer doesn't have WPS, you'll probably have to enter a 'network key' – a series of numbers and letters – into the printer using the function buttons and screen on the printer in order to establish the connection between your printer and router.

Note: To check if your router is WPS-enabled, look for a button labeled WPS on your router or access point. If there is no hardware button, there may be a virtual WPS button in the software for the device. Check your network product documentation for details.

WPS makes it easier and a bit quicker. There are some different ways to do it. First of all, WPS can be a workaround for connecting to Wi-Fi without a password. To do so, you should hit the WPS button on your router to enable device detection.

WPS is a convenient way to connect your devices to your router, but it can pose a security risk. It's a good idea to turn off WPS functionality once all your devices are connected and allow guests to connect via a guest network so your private devices stay safe.

Basically, the WPS pin is located on the backside of your HP printer and used to set up an HP printer. To set up your printer wirelessly you need a WPS pin code, which will be used for your printer setup.

The WPS PIN is displayed on the LED screen of the printer when you trying to wirelessly connect your computer to it. This has nothing to do with your router. If your computer has located your network printer, then it will ask you for a WPS PIN. Just look for the generated PIN on your printer screen.

For printers, it usually means Wi-Fi, Bluetooth or both.

Some models will instead use the WPS symbol, which looks like two arrows pointing to each other in an oval shape. It kind of looks like the universal recycling symbol if it were missing an arrow and is more circular than triangular.

Like with routers, the WPS button is usually somewhat subtly placed on your modem. Often, it's on the back of the device amongst the ports and connections, so users can't tap it by accident. It's worth looking carefully at your modem before you plug it in so no cables can get in the way of your vision.

What is a PIN from the router label phone? ›

The PIN number is a 8 digit number and you can usually find it on the label/sticker at the bottom of the router. You would need to get this to connect to your wireless network or even when setting up your mobile hotspot. Some routers have a default PIN. May we know, what is the make and model of your router?

Connecting using a network key or PIN

If your printer doesn't have WPS, you'll probably have to enter a 'network key' – a series of numbers and letters – into the printer using the function buttons and screen on the printer in order to establish the connection between your printer and router.

Some HP printers come with a feature called Wi-Fi Protected Setup (WPS) which allows you to connect the printer to a wireless network without the need for a computer or the network name and password.

Some access points (often called routers or hubs) feature an automatic connection button labelled “WPS” which stands for Wi-Fi Protected Setup and allows permitted devices to connect to your network without needing to enter a password.

Remove and Re-Add Your Printer in Windows

If this happens, go to Settings > Devices > Printers & Scanners, select your printer, and remove it. Then click Add a Printer or Scanner to re-add it to the device list.