Where does the blue wire go on a ceiling fan?
Where does the blue wire go on a ceiling fan? The blue wire goes to the light kit. No light kit means it will not be hooked up.
The blue wire from the ceiling fan gets connected to the second live wire from the ceiling. This second wire can vary in color but is most commonly red or black. This connection allows you to power your lights from the second switch. Connect the white grounded wire from the ceiling to the white wire from the fan.
Black wire is for the fan. Blue wire is for the light, if light is included with the fan. White wire is neutral. Green wire is for the ground.
Look at the wires coming from your ceiling fan. The black wire from the ceiling fan is the hot wire that runs the motor and turns the fan blades. The white wire is neutral and completes the fan circuit. The blue wire is the hot wire for the ceiling fan light fixture.
Typically when there is a red wire at the ceiling fan box it is connected to the blue light fixture wire of the ceiling fan. If there is a Black and Red wire then this usually means there are two separate wall switches, one for each function.
If you only have one switch, connect the black and blue wires. The black and blue wires need to be connected. You will be able to control your fan and lights with a single switch.
If the light can be turned on or off from switches at each side of the room, you'll see a blue wire that connects the electrical circuits for three-way switches. In some cases, it may run through the electrical box where the existing light is installed, but it is only a switch wire and not a wire for the light.
How to Wire a Ceiling Fan | Lighting and Ceiling Fans | The Home Depot
These two colors are hot wires usually pulled in conduit for common plug-in electrical devices. Blue wires are used as travelers, usually on three- or four-way switches (controlling a light from multiple locations) or as switch legs for things such as fans or lights.
How to Wire a Fan with Two Switches - YouTube
Is blue wire the same as red?
Red wires are hot wires common in a 240-volt outlet or when a wall switch controls the outlet. Blue and yellow wires are hot wires for ceiling fans and three- or four-way switches. White or gray electrical wires are neutral wires.
These wires are typically used for switch wiring as well as the interconnection between smoke detectors hard-wired into the power system. You can link two red wires together, or you can link a red wire to a black wire. Since red wires conduct current, they are considered hot.
How to Install a Ceiling Fan on a Prewired Ceiling Fan Outlet
...
US AC power circuit wiring color codes.
Function | Line, 3-phase |
---|---|
label | L3 |
Color, common | blue |
Color, alternative | yellow |
How to Wire a Ceiling Fan | Lighting and Ceiling Fans | The Home Depot
...
US AC power circuit wiring color codes.
Function | Line, 3-phase |
---|---|
label | L3 |
Color, common | blue |
Color, alternative | yellow |
The blue wire also referred to as the neutral wire, has the function of transferring electricity away from the appliance. The brown wire, otherwise known as the live wire, transfers electricity to the appliance. The combination of these wires is referred to as a circuit.
The blue wire is known as the Switched Live and takes power to the light. Switched Live is only live when the switch is on (this is where it gets its name from).