How to Clean & Disinfect Wood Furniture without Damaging Finish | Pine-Sol® (2024)

FAQs

How to Clean & Disinfect Wood Furniture without Damaging Finish | Pine-Sol®? ›

A: Yes. Original Pine-Sol^® Multi-Surface Cleaner is registered with the EPA as a disinfectant when used as directed full strength. When used according to the instructions on the product, it kills 99.9% of germs and household bacteria on hard, nonporous surfaces.

A: Yes. Original Pine-Sol^® Multi-Surface Cleaner is registered with the EPA as a disinfectant when used as directed full strength. When used according to the instructions on the product, it kills 99.9% of germs and household bacteria on hard, nonporous surfaces.

This hack claims to freshen up upholstered furniture. by spraying Pine-Sol on a hot damp microfiber cloth, and then wrapping it around a pot lid and rubbing in circles across the fabric.

Not recommended for use on aluminum, brass, chipped enamel, copper, galvanized steel, paper surfaces, porous painted surfaces, sealed and unsealed granite and marble, silver, unsealed stone, unfinished wood.

Lysol's the better disinfectant (though why anyone outside a hospital should need so strong a *household* disinfectant more than once or twice a YEAR is another matter entirely… seriously: a pint of Lysol should be enough for a 9-room house for 5 years), and Pine-sol's the better detergent.

No, vinegar does not sanitize or disinfect, and DIY cleaners using vinegar don't have approval from the Environmental Protection Agency (EPA) for effectiveness to disinfect floors. To disinfect any surface, you'll want to use products that have been approved by the EPA, such as Pine-Sol® Original.

Pine-Sol now claims to be safe for sealed wood floors and furniture. In addition to cleaning wood, this classic cleaning product is also suitable for such household chores as mopping the floors and wiping down the kitchen sink. Growing up, the scent of Pine-Sol was always a signature fragrance in my home.

Use Pine-Sol^® for quick wipe-downs on wooden tables and chairs, or for periodic deep-cleans on wooden floors and furniture.

Step 1 Pour full-strength (undiluted) Original Pine-Sol^® onto a clean cloth or sponge or mix 1 cup of Original Pine-Sol^® with ½ gallon of water. Step 2 Apply to wet the hard, nonporous surface and let it stand for 10 minutes. Step 3 Rinse with fresh, clean water. For visibly soiled surfaces, pre-cleaning is required.

You can use Pine-Sol^® on wood floors, though it is not recommended for use on unfinished, unsealed, unpainted, waxed, oiled or worn wood.

What cleaner for wood furniture? ›

Not only does this product put a film on the floor it also makes the floor very slippery. Pine Sol. Again, leaves a residue on the floor that can build up over time and be harder to remove. It's also higher alkaline and can damage the finish over time.

Step 1 Pour full-strength (undiluted) Original Pine-Sol^® onto a clean cloth or sponge or mix 1 cup of Original Pine-Sol^® with ½ gallon of water. Step 2 Apply to wet the hard, nonporous surface and let it stand for 10 minutes. Step 3 Rinse with fresh, clean water.

To disinfect, use an EPA-registered disinfecting product or a stronger bleach solution. Clean the surface with soap and water first. Always read the label of disinfecting products to make sure the products can be used on the type of surface you are disinfecting (such as a hard or soft surface).

According to the CDC, most household cleaners will effectively disinfect. Natural products like vinegar or tea tree oil won't kill coronaviruses though. Disinfectants that work include: Bleach solution (4 teaspoons of bleach in a quart of water)

Hydrogen peroxide is one of the most powerful natural cleaning and disinfecting agents. Health professionals trust it against harmful bacteria, antigens, and viruses. It's used for a variety of disinfecting jobs, including cleaning cuts, removing earwax, and promoting dental hygiene.